0
producten vergelijken
New
Action
Youtube
Tip
Universal screw countersunk head PZ

Screws with character


Dynaplus Universal screws with Pozi-drive are developed for the best use in practice. They screw in fast and light and the screws can be used in various building materials. Efficiency, ease of use and durability are central to the development of Dynaplus screws. Multiple independent test institutes have now issued their certificates for our quality screws.
The universal screws have a special screw thread with coarse pitch, a unique drilling point and a transparant lubricant. This means they screw in super fast and in most cases pre-drilling is not required. Dynaplus screws are up to 50% faster than ordinary chipboard screws and screw in with a remarkable low resistance, as a result of this many more screws can be used per battery charge. The perfect shaped starting tip grips directly in the wood and ensures a super fast start. Due to the Dynaplus drilling point with cross-sectionss and serrated screw thread, splitting of the wood is prevented. The screw are made of carbon hardened steel and are because of an balanced hardening proces, they are not only strong but also still very flexible. The change of breaking is because of this minimalized; both during screwing in and after when the wood starts to shrink and swell.

from
New
Action
Youtube
Tip
Universal screw countersunk head TX

Screws with character

Dynaplus Universal screws with TX-drive are developed for the best use in practice. They screw in fast and light and the screws can be used in various building materials. Efficiency, ease of use and durability are central to the development of Dynaplus screws. Multiple independent test institutes have now issued their certificates for our quality screws.
The universal screws have a special screw thread with coarse pitch, a unique drilling point and a transparant lubricant. This means they screw in super fast and in most cases pre-drilling is not required. Dynaplus screws are up to 50% faster than ordinary chipboard screws and screw in with a remarkable low resistance, as a result of this many more screws can be used per battery charge. The perfect shaped starting tip grips directly in the wood and ensures a super fast start. Due to the Dynaplus drilling point with cross-sections and serrated screw thread, splitting of the wood is prevented. The screw are made of carbon hardened steel and are because of an balanced hardening proces, they are not only strong but also still very flexible. The change of breaking is because of this minimalized; both during screwing in and after when the wood starts to shrink and swell. For maximum grip they are fitted with an extra deep TX-drive.

from
New
Action
Youtube
Tip
Universal screw panhead TX

For metal on wood constructions


Because of the 90° angle under the head, Dynaplus Universal screws panhead can be used for fixing metal on wood. For example attaching clamps of profiles. Of course you also benefit the other benefits of Dynaplus universal screws. They also have a special screw thread with coarse pitch, a unique drilling point and a transparant lubricant. This means they screw in super fast and in most cases pre-drilling is not required. Dynaplus screws are up to 50% faster than ordinary chipboard screws and screw in with a remarkable low resistance, as a result of this many more screws can be used per battery charge. The perfect shaped starting tip grips directly in the wood and ensures a super fast start. Due to the Dynaplus drilling point with cross-sections and serrated screw thread, splitting of the wood is prevented. The screw are made of carbon hardened steel and are because of an balanced hardening proces, they are not only strong but also still very flexible. The change of breaking is because of this minimalized; both during screwing in and after when the wood starts to shrink and swell. For maximum grip they are fitted with an extra deep TX-drive.

from
New
Action
Youtube
Tip
Universal screw flathead TX

The best alternative for stainless steel screws


The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark gray Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

from
New
Action
Youtube
Tip
Universal screw panhead TX

Remarkable example anti rust screws


Because of the 90° angle under the head, Dynaplus Universal screws panhead can be used for fixing metal on wood. For example attaching clamps of profiles. Of course you also benefit the other benefits of Dynaplus universal screws. They also have a special screw thread with coarse pitch, a unique drilling point and a transparant lubricant. This means they screw in super fast and in most cases pre-drilling is not required. Dynaplus screws are up to 50% faster than ordinary chipboard screws and screw in with a remarkable low resistance, as a result of this many more screws can be used per battery charge. The perfect shaped starting tip grips directly in the wood and ensures a super fast start. Due to the Dynaplus drilling point with cross-sections and serrated screw thread, splitting of the wood is prevented. The screw are made of carbon hardened steel and are because of an balanced hardening proces, they are not only strong but also still very flexible. The change of breaking is because of this minimalized; both during screwing in and after when the wood starts to shrink and swell. For maximum grip they are fitted with an extra deep TX-drive.
The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The dark grey Dynaplus AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.
The screws are galvanized before they get a surface treatment with the Dynaplus AR-coating. This coating consists of three thin layers of coating and ensures a very good adhesion so that the coating does not get damaged during use of the screws. The screws are hardened in a sophisticated hardening process to make them very strong but also still very flexible. This reduces the risk of breaking off the screws during applying but also after the screws are processed, when the wood starts to shrink and swell.

from
New
Action
Youtube
Tip
Decking screw

The strongest screw for building a deck


Dynaplus AR-coating screws are also available in a special decking screw type. This screw has a special 60° small flathead with sharp cutting nibs which penetrates easily in decking boards. The screws have a bronze coloured AR-coating, which matches well with the wood for a nice finish. Dynaplus decking screw is provided with a special drilling point that reduces the splitting of the wood. Pre-drilling is not necessary in most cases. The coated carbon steel Dynaplus decking screws are almost two times stronger as stainless steel decking screws, therefore they are easy to apply in hard woods like Bangkirai.
This benefit, combined with a better corrosion resistance than stainless steel A2, makes the Dynaplus decking screw the perfect screw for both the do-it-yourselfer and the professional craftsman.

from
New
Action
Youtube
Tip
Rubber T-spacer for deckings

Spacers for a sustainable deck


These rubber T-spacers are developed to build a sustainable deck in a user-friendly way. The T-spacers create an airlayer between the decking boards and the battens. If the wood starts to shrink and swell, it gives the screw the necessary space to move with it. Thanks to the small notch, the boards are exactly 5 mm apart. Dry rot is also prevented by the layer of air. By placing a T-spacer on each batten and between the decking boards, a stable and quiet deck is the end result. No clapping board or anoying contact noise.

 

Plastic box 100 pieces

Material: rubber

New
Action
Youtube
Tip
Rubber pads for decking

A sustainable wooden deck is build easily with the help of Dynaplus floor pads. These rubber pads, size 10 by 10 cm, are placed on a pavement tile on which the hardwood battens are placed. This avoids that the battens come in contact with the ground which prevents dry rot on the long term. Besides that the floor pads also reduce the contact noise between the battens and the ground and gives a stable deck.

 

Plastic box 100 pieces

Material: rubber

 

New
Action
Youtube
Tip
Washerhead construction screws Indoor

To fasten bearing wood constructions


Wood construction scews, with a wide washer head and TX-drive, are specially designed for connecting wooden beams and load-bearing timber structures. Due to the large head diameter of the screw, it has a large bearing and clamping capacity. Because this screw can carry a heavier load, you need less mounting points in a wooden construction.
When you make a wood-on-wood connection you want the screw to pull the two pieces of wooden beams strongly together, therefore we use partial thread on the screws with a length of 80 mm and more. The special knurled part, above the thread, pre-drills some extra space, allowing the slightly thicker shank to go easily into the wood for a better clamping capacity. Because the shank goes in easily through the second wooden beam, it will be strongly tightened against the first wooden beam.


Wood construction screws are a perfect alternative to the old-fashioned coach screws: they are much stronger, have a better pull-out strength and are much easier to use because they are easy to handle with a powerdriver. Because of the big TX-drive you have an optimum power transmission from the bit to the screw so this means more control, and easy screwing. Because of the strength of the hardened carbon steel screws you can replace your 10,0 mm coach screw with a 8,0 mm Dynaplus wood construction screw.


In addition to the specials cross-sections there's an extra cutting point added to the tip of these screws. This provides these big screws a bigger pre-drilling capacity and makes screwing more easy.

from
New
Action
Youtube
Tip
Washerhead construction screws Outdoor

For building wooden constructions outdoor


The bronze coloured Dynaplus wood construction scews, with a wide washer head and TX-drive, are specially designed for connecting wooden beams and load-bearing timber structures outside. They are perfect for building porches, patios and other wooden constructions which are exposed to the weather. Due to the large head diameter of the screw, it has a large bearing and clamping capacity. Because this screw can carry a heavier load, you need less mounting points in a wooden construction.


When you make a wood-on-wood connection you want the screw to pull the two pieces of wooden beams strongly together, therefore we use partial thread on the screws with a length of 80 mm and more. The special knurled part, above the thread, pre-drills some extra space, allowing the slightly thicker shank to go easily into the wood for a better clamping capacity. Because the shank goes in easily through the second wooden beam, it will be strongly tightened against the first wooden beam.


Wood construction screws are a perfect alternative to the old-fashioned coach screws: they are much stronger, have a better pull-out strength and are much easier to use because they are easy to handle with a powerdriver. Because of the big TX-drive you have an optimum power transmission from the bit to the screw so this means more control, and easy screwing. Because of the strength of the hardened carbon steel screws you can replace your 10,0 mm coach screw with a 8,0 mm Dynaplus wood construction screw.


In addition to the specials cross-sections there's an extra cutting point added to the tip of these screws. This provides these big screws a bigger pre-drilling capacity and makes screwing more easy.
The universal outdoor screws with Anti-Rust coating C4 are an alternative to stainless steel A2 screws. The screws are made of hardened carbon steel and they are up to twice as strong as stainless steel screws. No more breaking off during screwing and in most cases you can use the screws without pre-drilling, even in hardwood.
The bronze AR-coating has an excellent corrosion resistance and meets the highest standard; corrosion class C4. The organic coating provides the carbon steel screws a permanent corrosion protection. Even when the coating surface is slightly damaged by using the screws. For example when you make small damage at the bit-recess the AR-coating is able to recover itself.

from
New
Action
Youtube
Tip
Hinge screw

For a secure mounting of hinges and fittings


Dynaplus Hinge screws are specially designed for mounting door and window hinges and fittings. The head diameter of the screw is slightly smaller than the Universal screw and fits perfectly into the screw holes of the hinge.
The head has no serrations and a special shape which provides for a nice and smooth finish in the screw holes. The screws are very strong, but still flexible, the chance of breaking the head during installation is, because of that, very small.
Our hinge screws meet the requirements of both NEN-5096 and NEN-EN-1627 to NEN-1630, therefore they are approved for use in safety fittings according the Police Hallmark for Safe Living®.

from
New
Action
Youtube
Tip
Hinge screw

A sustainable solution for coated hinges


Dynaplus Hinge screws are specially designed for mounting door and window hinges and fittings. The head diameter of the screw is slightly smaller than the Universal screw and fits perfectly into the screw holes of the hinge.
The head has no serrations and a special shape which provides for a nice and smooth finish in the screw holes. The screws are very strong, but still flexible, the chance of breaking the head during installation is, because of that, very small. The coated version is developed to be used in combination with coated hinges and fittings and locks. The silver coloured AR-coating C4 matches perfectly with the coating found on hinges.
Several brands like AXA®, BSW® and Maco® developed hinges with a coating for special applications where stainless steel is not an option. For example environments which contain salty or chemically polluted air or even acidic environments. Our Dynaplus® hinge screws with AR-coating are the perfect and durable combination for these coated hinges. Another good combination is with acid modified wood like Accoya®.

from
New
Action
Youtube
Tip
MDF screw

Easy to use in MDF without pre-drilling


Dynaplus MDF-screws are designed to connect two MDF panels or boards without splitting the material on the end of the grain. Pre-drilling is not required, until three centimeters on the edge of the panel. The screws have a high pull-out strength which leads to a solid connection between both panels. In addition, we have an extra small 75° flathead with cutting nibs which provides a smooth and clean countersunk into the MDF material.
These screws are also very suitable to be used in chipboard, plywood and other board materials which are susceptible to splitting and cracking.

from
New
Action
Youtube
Tip
Glass strip screw

Fastening wooden glass strips without pre-drilling


Dynaplus glass strip screws are specially designed for fastening small wooden glass strips or small slats, for instance glazing strips. The screws can be used without pre-drilling. The special self drilling Diamond-point on the screw prevents the wood from splitting. The small 75°-flathead with cutting nibs ensures optimum clean countersinking in the wood. The glass strip screws are provided with our bronze AR coating C4 for outdoor use.

from
New
Action
Youtube
Tip
Fence screw

For easy assembly of garden hinges and latches


Fence screws are designed for easy fastening of different types of garden hinges.
The screws are made of hardened carbon steel with a silver grey Anti-Corrosion coating.
These special screws are a perfect alternative for coach screws, chipboard screws or bolts. The self drilling diamond point provides a simple and fast mounting without pre-drilling, even in hardwood. The oval head gives a nice finish and the collar head ensures a solid connection. The garden fence screw fits exactly into a screw hole of 7 mm.
Also available with a black head especially for black coloured gate hardware.
Fence screws are also suitable for screwing in angle brackets.

from
New
Action
Youtube
Tip
Post screw

The best screw for fastening post beams into a bearer


For easy, quick and secure fastening of garden posts in a bearer or postholder.
The special Post screws are made of hardened steel with a silver AR-coating C4. The screws have a self drilling diamond point. This makes these screws perfect for hardwood and impregnated garden posts. Beneath the oval head of the screw is a collar that fits perfectly into the holes of the bearer or the post holder.

from
New
Action
Youtube
Tip
Bits & Bitsets

Handy boxes and blisters
Dynaplus TX bits are made of high-grade chrome vanadium S2 hardened steel which provides a first-rate professional quality. The bits are made slightly conical shaped, this ensures a good bit fit in combination with our Dynaplus screws. This makes screwing easy.
The bits are packed in blisters: the 25 mm ones per 10 and the 50 mm per 5, easy to keep for the professional user.
Besides the dispensers we have two Dynaplus bitsets, each containing 32 pieces, with a wide range of universal bits and the special Dynaplus® TX-bits. The new TX-bits are colour coded so you can easily find the correct TX drive. The bitset also contains a magnetic bit holder for an easy and quick changing of bits.

HANDY!
All sizes Dynaplus TX-bits have their own colour

from
New
Action
Youtube
Tip
Assortmentbox

The Dynaplus assortment cases are filled with a wide variety Universal screws.
The firm steel case has convenient removable plastic boxes so you don’t have to take the complete case to each small job. Also available, a plastic organizer with both screws and plugs: for the small jobs around the house.

from
 1

Copyright © Dynaplus 2018 | Privacy Policy