General

Easy to use in MDF without pre-drilling


Dynaplus MDF-screws are designed to connect two MDF panels or boards without splitting the material on the end of the grain. Pre-drilling is not required, until three centimeters on the edge of the panel. The screws have a high pull-out strength which leads to a solid connection between both panels. In addition, we have an extra small 75° flathead with cutting nibs which provides a smooth and clean countersunk into the MDF material.
These screws are also very suitable to be used in chipboard, plywood and other board materials which are susceptible to splitting and cracking.

Technical specifications

Screw type:
MDF screw
Material:
Case hardened carbon steel
Surface treatment:
Zinc plated 5 µm
Type of head:
Countersunk 75°
Drive:
TX-drive
Type of predrill:
Diamond point
Self Tapping:
not applicable
Packaging:
Carton
Bit maten
T-15
Keurmerken
EN-14592
Choose a version first

Available sizes

Drive
Inhoud
Omdoos
Productnumber
20/15 x 3,5
TX-15
200
12.000
0287.01.17001
30/20 x 3,5
TX-15
200
9.600
0287.01.17201
40/28 x 3,5
TX-15
200
6.000
0287.01.17601
50/35 x 3,5
TX-15
200
4.800
0287.01.17901
40/28 x 4
TX-15
200
4.800
0287.01.25601
50/35 x 4
TX-15
200
4.800
0287.01.25901
60/40 x 4
TX-15
200
3.600
0287.01.26001
Scroll om meer te bekijken

Copyright © Dynaplus 2018 | Privacy Policy